Dell H476M, E04J manual Enclosure mode switch

Redundant Array of Independent Disks (RAID)

Controller	Host-based RAID support using
	PowerEdge™ RAID controller H800.
Management	RAID management using
	Dell OpenManage™ Server
	Administrator 6.2 or later.
Back-Plane Board
Connectors	• 24 SAS hard-drive connectors
	• Two power supply/cooling fan
	module connectors
	• Two sets of EMM connectors
	• One control panel connector for front LEDs
	and enclosure mode switch
Sensors	Two temperature sensors
Back-Panel Connectors (per EMM)
SAS connectors	• One SAS IN connector for connection
	to the host
	• One SAS OUT connector for expansion to
	an additional enclosure
	NOTE: SAS connectors are SFF-8086/SFF-8088
	compliant.
Serial connector	One 6-pin UART mini-DIN connector
	NOTE: For engineering use only.
LED Indicators
Front panel	• One two-color LED indicator for
	system status
	• Two single-color LED indicators for
	power and split mode
Hard-drive carrier	• One single-color activity LED
	• One two-color LED status indicator
	per drive

8

Getting Started With Your System