LED Indicators (continued)
EMM | Three |
| one each for the two EMM SAS ports and |
| one for the EMM status |
Power supply/cooling fan | Three LED status indicators for power supply |
| status, power supply/cooling fan fault status, |
| and AC status |
|
|
Switch |
|
|
|
System identification button | Located on the front control panel. |
| This button is used to locate a system |
| within a rack. |
Mode switch | Located on the front control panel. |
| This switch is used to switch the system |
| between unified and split mode operation. |
|
|
Power Supplies |
|
|
|
AC power supply (per power supply) |
|
Wattage | 600 W |
Voltage | |
Heat dissipation | 188 W |
Maximum inrush current | Under typical line conditions and over the |
| entire system ambient operating range, |
| the inrush current may reach 55 A per |
| power supply for 10 ms or less. |
|
|
Available Hard Drive Power (Per Slot) |
|
|
|
Supported hard drive power | Up to 1.2 A at +5 V |
consumption (continuous) | Up to 0.5 A at +12 V |
| |
|
|
EMM Power (Per Slot) |
|
|
|
Maximum power consumed by EMM | 14 W at +12 V |
Maximum available power | 100 W at +12 V |
Maximum available power | 1 W at +5 V (standby) |
Getting Started With Your System
9
