Table 16. Typical Alarms and Conditions (continued)

Alarm or Condition

Possible Cause

Action

 

 

 

Charger Failure

A battery charger fault has been

The UPS turns off the charger until the next

(Alarm 34)

detected.

power recycle. Contact your service

 

representative.

Continuous Alarm

 

 

 

 

 

 

Output Short Circuit

The UPS has detected an

The UPS shuts down after five line cycles.

(Alarm 58)

abnormally low impedance

 

placed on its output and

 

Continuous Alarm

 

considers it a short circuit.

 

 

 

 

 

 

Heatsink Over Temperature

The UPS has detected that one

Ensure that the fans are spinning and that the

(Alarm 73)

of its heat sinks has exceeded

air intake vents on the UPS are not blocked.

the maximum defined

 

Continuous Alarm

Once the maximum temperature is reached,

operating temperature. Possible

the UPS shuts down.

 

 

fan failure.

 

 

 

 

 

Fatal EEPROM Fault

There is EEPROM data

Contact your service representative.

(Alarm 53)

corruption due to a failed

 

device or incorrect flash

 

Continuous Alarm

 

upgrade.

 

 

 

 

 

 

Fan Failure

The UPS has detected that one

This is an alarm only. Contact your service

(Alarm 193)

or more fans are not

representative immediately and remove the

functioning properly.

load.

Continuous Alarm

 

 

 

 

 

Silencing the Alarm

Press any button on the control panel to silence the alarm. Check the alarm condition and perform the applicable action to resolve the condition. If any new alarm becomes active, the audible alarm resumes, overriding the previously silenced alarm.

Troubleshooting 73

Page 73
Image 73
Dell J735N, K802N, K811N, K792N, 1000W, 2700W, J727N, H945N, 1920W, H928N, H919N, 2300W, 1500W, J718N manual Silencing the Alarm

H928N, K811N, H919N, 1000W, 2700W specifications

Dell's power supply units (PSUs) are essential components for Dell servers and workstations, providing reliable power solutions tailored to meet different demands. Among these, the 500W, 1000W, and 1920W/1500W power supplies stand out for their efficiency, performance, and advanced features tailored to various IT environments.

Starting with the 500W power supply, this unit is designed for entry-level servers and workstations. It boasts a compact design that facilitates easy installation in space-constrained scenarios. The 500W PSU operates with a high efficiency rating, contributing to lower energy costs and reduced heat output. It supports the latest energy standards, including 80 PLUS certification, ensuring that customers can rely on it for consistent performance and reliability. This unit is particularly suitable for small to medium businesses looking for cost-effective power solutions for basic applications.

The 1000W power supply represents a step up, featuring dual 12V outputs that provide stable power for more demanding tasks. Designed for mid-range servers and advanced workstations, it balances performance and efficiency, making it ideal for enterprises that require additional processing power for virtualization, data analysis, and high-performance computing tasks. The 1000W PSU includes built-in protections against over-voltage, short circuits, and over-temperature conditions, adding an extra layer of reliability that is crucial for mission-critical operations.

For environments with higher power demands, Dell offers the 1920W/1500W power supply. This robust unit is engineered for high-performance servers and large-scale data centers, where maximum uptime and performance are paramount. The modular design of the 1920W/1500W power supply allows for enhanced cable management, reducing clutter and improving airflow within racks. With an efficiency rating that adheres to 80 PLUS Platinum standards, this PSU not only minimizes energy consumption but also maximizes operational efficiency, making it ideal for organizations looking to optimize their data center environments.

In summary, Dell's 500W, 1000W, and 1920W/1500W power supplies cater to a wide range of computing needs. From entry-level solutions to high-capacity units for demanding environments, Dell ensures that its power supplies provide reliability, efficiency, and performance. As organizations continue to evolve their IT infrastructure, these power supplies remain pivotal in supporting their growth and operational goals.