5.Tighten the screws to secure the hard drive to the computer.
6.Connect the
7.Install the:
a.battery
b.base cover
8.Follow the procedures in After Working Inside Your Computer.
Removing the Speakers
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a.base cover
b.battery
3.Perform the following steps to remove the speaker:
a.Disconnect the speaker cable from the system board [1].
b.Unroute the speaker cable and remove the cable from the routing tabs [2].
c.Remove the screw that secures the speakers to the computer.
d.Lift the speakers, along with the speaker cable, off the computer [3].
Installing the Speakers
1.Align the speakers in the slot on the computer.
2.Route the speaker cable through the routing tabs on the computer.
3.Tighten the screw to secure the speakers to the computer.
4.Connect the speaker cable to the system board.
5.Install the:
17