On the Cisco Nexus 5010 switches

1.Log into the switch.

2.Type the following commands into your first Cisco Nexus 5010 switch (see Figure 34):

configure terminal feature lacp vlan 101-102 exit

interface ethernet 1/1-2 channel-group 1 mode active exit

interface port-channel 1 switchport mode trunk

switchport trunk allowed vlan 101-102 end

Figure 34: Configuring a port channel with Trunking and multiple VLANs on the first Cisco Nexus 5010 switch.

3.Type the following commands into your second Cisco Nexus 5010 switch (see Figure 35):

configure terminal feature lacp vlan 103-104 exit

interface ethernet 1/1-2 channel-group 1 mode active exit

interface port-channel 1 switchport mode trunk

switchport trunk allowed vlan 103-104 end

How to deploy the Dell M8024 family of switches in a Cisco Nexus network

28