Figure 47: Initial configuration and assigning ports to port channels on the first

Cisco Nexus 5010 switch.

3.Type the following commands into the first Cisco Nexus 5010 switch (see Figure 48):

interface port-channel 1 switchport mode trunk

switchport trunk allowed vlan 1,101 vpc peer-link

spanning-tree port type network exit

interface port-channel 10 switchport mode trunk switchport trunk allowed vlan 101 vpc 10

exit

interface port-channel 11 switchport mode trunk switchport trunk allowed vlan 101 vpc 11

end

How to deploy the Dell M8024 family of switches in a Cisco Nexus network

36