Figure 48: Configuring port channels and assigning vPC domains on the first Cisco

Nexus 5010 switch.

4.Type the following commands into the second Cisco Nexus 5010 switch (see Figure 49):

configure terminal feature lacp feature vpc

vlan 101 exit

vpc domain 1

peer-keepalive destination 172.185.1.1 exit

interface ethernet 1/19-20 channel-group 1 mode active exit

interface ethernet 1/1-2 channel-group 10 mode active exit

interface ethernet 1/3-4 channel-group 11 mode active exit

How to deploy the Dell M8024 family of switches in a Cisco Nexus network

37