Configuring iSCSI Optimization 471
Configuring iSCSI Optimization (CLI)

This section provides information about the commands you use to configure

iSCSI settings on the switch. For more information about the commands, see

the

Dell Networking N2000, N3000, and N4000 Series Switches CLI
Reference Guide

at support.dell.com/manuals.

Command Purpose
configure Enter Global Configuration mode. iSCSI
optimization is enabled by default.
iscsi target port

tcp-port-1

[

tcp-port-2...tcp-port-16

]
[address
ip-address
] [name

targetname

]
Configure an iSCSI target port and, optionally,
address and name.
•
tcp-port-n
—TCP port number or list of TCP port
numbers on which the iSCSI target listens to
requests. Up to 16 TCP ports can be defined in the
system in one command or by using multiple
commands.
•
ip-address
—IP address of the iSCSI target. When
the no form of this command is used, and the tcp
port to be deleted is one bound to a specific IP
address, the address field must be present.
•
targetname
—iSCSI name of the iSCSI target. The
name can be statically configured; however, it can be
obtained from iSNS or from sendTargets response.
The initiator must present both its iSCSI Initiator
Name and the iSCSI Target Name to which it wishes
to connect in the first login request of a new session
or connection.