Dell Dell PowerConnect Firmware CLI Transition Guide , , April 6, 2011 Page 9

Dell PowerConnect™ Firmware CLI Transition Guide
April 6, 2011 Page 9
Feature Previous Implementation Dell™ PowerConnect 4.x
Implementation
Comments
IPv6 Routing show ipv6 interface {brief|
loopback loopback-id |
tunnel tunnel-id | vlan vlan-
id [prefix]}
show ipv6 interface [brief]
[loopback loopback-id |
tunnel tunnel-id | vlan vlan-id
[prefix]]
The command mode was changed
from Privileged EXEC to Privileged
EXEC and User EXEC.
IPv6 Routing show ipv6 neighbors show ipv6 neighbors The command mode was changed
from Privileged EXEC to Privileged
EXEC and User EXEC.
IPv6 Routing show ipv6 route summary
[all]
show ipv6 route summary
[best]
The command mode was changed
from Privileged EXEC to Privileged
EXEC and User EXEC.
Management
Interfaces
ipv6 address dhcp ipv6 address dhcp Added command modes Interface
(Loopback, Port-Channel)
Configuration.
Mode
Commands
configure terminal Terminal is now accepted as an
optional parameter on the
configure command.
Tunnel
Interface
tunnel destination ipv4addr tunnel destination ip-address Added Tunnel Interface
Configuration.
VLAN name string (VLAN
Configuration)
name <vlan-name> Moved the command from
Interface Configuration mode to
VLAN Configuration mode.