Dell PowerConnect™ Firmware CLI Transition Guide April 6, 2011 Page 17 Time-Based
ACLs
{deny | permit} {every | {{icmp |igmp| ipv6
| tcp | udp | number} {any |
sourceipv6prefix/prefixlength} [eq {portkey
|portvalue}] {any |
destinationipv6prefix/prefixlength} [eq
{portkey | portvalue}] [flow-label value]
[dscp dscp]}} [log][assign-queue queue-id]
[{mirror | redirect} interface]
{deny | permit} {every | {{icmpv6 | ipv6 | tcp
| udp | protocolnumber} {any |
sourceipv6prefix/prefixlength} [eq
{portnumber | portkey}] {any |
destinationipv6prefix/prefixlength}] [eq
{portnumber | portkey}] [flow-label flow-label-
value] [dscp dscp-value]} [assign-queue queue-
id] [log] [{mirror | redirect} interface-id]
[time-range time-range-name]
Time-Based
ACLs
show ipv6 access-lists [name] show ipv6 access-lists [name]
Time-Based
ACLs
show mac access-list name show mac access-list name
Tunnel
Interface
tunnel destination ipv4addr tunnel destination ip-address
Tunnel
Interface
tunnel source {ipv4addr | vlan vlan-id} tunnel source { ip-address | interface-type
interface-number
User Manager
Enhancements
aaa authentication dot1x default method1 aaa authentication dot1x default { radius | ias
| none }
Virtual Router
Redundancy
Protocol (VRRP)
show ip vrrp interface { brief | [stats] vlan
vlan-id vr-id }
show vrrp interface [ brief | vlan <vlan-id>
{stats} ]
Virtual Router
Redundancy
Protocol (VRRP)
show ip vrrp show vrrp [brief | group]
VLAN dvlan-tunnel ethertype
{802.1Q|vman|custom 0-65535}
dvlan-tunnel ethertype {802.1Q | vman |
custom 0-65535 [primary-tpid] }
VLAN switchport mode {access | trunk |
general|dot1q tunnel }
switchport mode {access | trunk | general }
VLAN name string (VLAN Configuration) name vlan-name
Corrected
parameters to
match CLI for
the following
commands:
mac address-table multicast forbidden address
mac address-table multicast static
mac address-table static
interface (removed the Interface Ethernet
command and consolidated it into the interface
command
interface range
show dot1x ethernet has been changed to show
dot1x interface {gigabitethernet |
tengigabitethernet)
arp (global) -- removed second (redundant)
instance -- it did not match CLI.
deny/permit (ipv6 acl mode)
show lldp med local-device detail -- Added the
word detail to command name, changed
description.