Dell PowerConnect™ Firmware CLI Transition Guide April 6, 2011 Page 21
Feature Previous Implementation Dell™ PowerConnect 4.x Implementation
Multicast ip pimsm spt-threshold This command is replaced by the ip pim spt-threshold
and ip pim register-rate-limit commands.
Multicast ip pimsm rp-address This command is replaced by the ip pim rp-address
command.
Multicast ip pimsm rp-candidate This command is replaced by the ip pim bsr-border
command.
Multicast show ip pimsm bsr This command is replaced by the show ip pim bsr-router
command.
Multicast show ip pimsm rphash This command is replaced by the show ip pim rp hash
command.
Multicast show ip pimsm rp mapping This command is replaced by the show ip pim rp
mapping command.
Multicast show ip mcast This command is changed to show ip multicast.
Multicast show ip mcast interface This command is changed to show ip multicast
interface.
OSPF 1583compatibility This command is changed to compatible rfc1583.
OSPFv3 Ipv6 ospf areaid This command is changed to ipv6 ospf area.
PHY
Diagnostics
show copper-ports cable-
length
This command is deprecated. Use the show copper-ports
tdr command to display the stored information
regarding cable lengths and the test copper-port tdr
command to perform a cable length test. Testing a port
brings the port down momentarily.
PIM-DM and
PIM-SM
ip pimsm and ip pimdm These commands are replaced by the ip pim command.
PIM-DM and
PIM-SM
ip pimsm hello-interval and
ip pimdm hello-interval
These commands are replaced by the ip pim hello-
interval command.
PIM-DM and
PIM-SM
show ip pimsm interface and
show ip pimdm interface
These commands are replaced by the show ip pim
interface command.
PIM-DM and
PIM-SM
show ip pimsm neighbor and
show ip pimdm neighbor
These commands are replaced by the show ip pim
neighbor command.
Power Over
Ethernet
power inline legacy This command is deprecated by the power inline
detection command.
Power Over
Ethernet
power inline traps enable This command is deprecated by the snmp-server enable
traps poe command.
Power Over
Ethernet
show poe-firmware-version This command is deprecated by the show power inline
firmware-version command.