Back to Contents Page
Processor Thermal-Cooling Assembly
Dell™ Inspiron™ 6400/E1505 Service Manual
Removing the Processor
Replacing the Processor
Removing the Processor Thermal-Cooling Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer.
1.Follow the instructions in Before Working Inside Your Computer.
2.Remove the hinge cover (see Removing the Hinge Cover).
3.Remove the keyboard (see Keyboard).
4.Remove the display assembly (see Removing the Display Assembly).
5.Remove the palm rest (see Removing the Palm Rest).
6.Loosen in consecutive order the four captive screws, labeled "1" through "4," that secure the processor
7.Lift the processor
1 | captive screws (4) | 2 | processor |
|
|
|
|
|
|
|
|
|
|
Replacing the Processor Thermal-Cooling Assembly
1.Place the processor
2.Tighten the four captive screws, labeled "1" through "4," in consecutive order.
