Dell PP20L owner manual Removing the Video Card/Thermal-Cooling Assembly

Back to Contents Page

Video Card/Thermal-Cooling Assembly

Dell™ Inspiron™ 6400/E1505 Service Manual

Removing the Video Card/Thermal-Cooling Assembly

Replacing the Video Card/Thermal-Cooling Assembly

NOTE: A removable video card is optional and present only if ordered by the customer. Standard video is integrated on the system board and is not customer removable.

Removing the Video Card/Thermal-Cooling Assembly

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer.

1.Follow the instructions in Before Working Inside Your Computer.

2.Remove the hinge cover (see Removing the Hinge Cover).

3.Remove the keyboard (see Keyboard).

4.Remove the display assembly (see Removing the Display Assembly).

5.Remove the palm rest (see Removing the Palm Rest).

NOTE: Remove the video card/thermal-cooling assembly as a single unit. Do not separate the thermal-cooling assembly from the video card.

6.Remove the video card/thermal-cooling assembly:

a. Loosen the two captive screws that secure the video card/thermal-cooling assembly and remove it from the system board.

1 video card/thermal-cooling assembly 2 captive screws (2)

Replacing the Video Card/Thermal-Cooling Assembly

1.Carefully align the video card/thermal-cooling assembly over the connector on the system board and press down.

NOTE: The video card/thermal-cooling assembly is labeled "PUSH HERE."

2.Tighten the two captive screws on the video card/thermal-cooling assembly.