16 Dell Latitude C/Port II APR System Information Guide
www.dell.com | support.dell.com
NOTICE: If you are using a monitor with the monitor stand, remove the
monitor from the stand before moving the docking control base into place.
cGently push the computer forward until the docking connector is
fully engaged.
Docking for the First Time With Windows XP and Windows 2000
1Dock and turn on your computer.
2Press <F2> during the system boot routine to view the system setup
program.
3Set Docking IRQ to Optimized.
4Set Universal Connect to Enabled.
5Exit the system setup program.
Your system will continue the boot process.
In Windows 2000, the Add New Hardware Wizard appears.
NOTE: If your computer is running Windows XP, the operating system
automatically installs the drivers. If your computer is running Windows 2000,
the Add New Hardware Wizard automatically installs your drivers.
Docking for the First Time With Windows Me
1Dock and turn on your computer.
2Press <F2> during the system boot routine to view the system setup
program.
3Set Docking IRQ to Optimized.
4Set Universal Connect to Enabled.
5Exit the system setup program.
Your system will continue the boot process.
The Add New Hardware Wizard appears.
6Select Search for the Best Driver for Your Device (Recommended)
and click Next.
7Click Next.
8Follow the prompts on the Add New Hardware Wizard.