Dell Latitude C/Port II APR System Information Guide 19
12 Continue to follow the prompts to complete the installation.
The Windows desktop appears and the installation is complete.
Docking for the First Time With Windows 95
1Dock and turn on your computer.
2Either press <F2> during the system boot routine, or press
<Fn><F1> after your computer boots to view the system setup
program.
3Set Docking IRQ to Optimized.
4Set Universal Connect to Enabled.
5Exit the system setup program.
The computer automatically detects new hardware.
6Click Yes at the System Settings Change window.
The computer restarts and automatically detects new hardware.
7Click OK at the Network window.
8Select the Identification tab at the next Network window.
9Enter a Computer Name and Workgroup that will identify your
computer on the network, and click Close.
If you are unsure what Computer Name and Workg roup to enter,
check with your System Administrator.
NOTE: You must enter a Computer Name and Workgroup to proceed with the
driver installation.
The computer automatically copies files and builds a driver
information database.
10 Click OK at the Configuration Setup window.
11 Follow the prompts to complete the installation.
The Windows desktop appears and the installation is complete.
NOTE: To use the USB connectors, you must install the USB supplement from
your ResourceCD in the Win95\OSUpdate directory. If you install the USB
supplement, your computer cannot enter suspend mode. Dell recommends that
you do not install the USB supplement unless you intend to use USB devices.