Soundbar Attachment to the Monitor

1.Power/Volume control

2.Power indicator

3.Headphone connectors

1.Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor.

2.Slide the Soundbar to the left until it snaps into place.

3.Connect the Soundbar with the power brick.

4.Plug the power cable of the power brick into a nearby outlet.

5.Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.

NOTICE: Do not use with any device other than Dell Soundbar.

NOTE: Soundbar Power Connector - 12V DC output is for optional Dell Soundbar only.

Back to Contents Page

Image 17

Contents

Dell SE178WFP Flat Panel Monitor Users Guide About Your Monitor Product Specific Problems Back View About Your MonitorFront View Side View Bottom View Monitor SpecificationsGeneral Right side Left side Preset Display Modes ResolutionFlat Panel Electrical Environmental Physical CharacteristicsPower Management Modes Pin Assignments Power Management DefinitionPin Number Pin Side of the Connected Signal Cable Plug and Play Capability LCD Monitor Quality & Pixel PolicyCaring for your Monitor Contacting Dell AppendixFCC Notice U.S. Only and Other Regulatory Information Using the Front Panel Buttons Setting Up Your MonitorConnecting Your Monitor Menu Using the OSDOn Screen Menu/Display OSD Icon Menu Name and Sub- menus Description Image settingsExit This is used to exit out of the Main Menu Settings Position OSD Settings Language Factory Reset OSD Warning Messages Using the Dell Soundbar OptionalAutomatic Save Soundbar Attachment to the Monitor Common Problems Product Specific ProblemsMonitor Specific Troubleshooting Specific Symptoms What YOU Experience Possible Solutions Product Specific Problems Back to Contents Organizing Your Cables Using Your Monitor StandAttaching the Stand Removing the Stand Using the Tilt