Dell SL400, SE400 manual PowerEdge, PCI Buses, RAID Controller, NICs, DRAC II or, System

Ta b l e 1 - 3 . P C I / P C I - X S l o t A s s i g n m e n t s f o r Po w e r E d g e C l u s t e r N o d e s ( c o n t in u e d )

PowerEdge	PCI Buses	RAID Controller	NICs	DRAC II or III
System
4600	PCI slot 1 is 32 bit,	Install in any available	Install in any available PCI slot.	If you are currently
	33 MHz.	64-bit, 33-MHz or 32-bit,		using a DRAC III
	Bus 1: PCI/PCI-X	33-MHz PCI slot.		or plan to use one
				in the future,
	slots 2 and 3 are
				install the DRAC
	hot-pluggable
				III in PCI slot 1.
	64 bit, up to
	100 MHz.
	Bus 2: PCI/PCI-X
	slots 4 and 5 are
	hot-pluggable
	64 bit, up to
	100 MHz.
	Bus 3: PCI/PCI-X
	slots 6 and 7 are
	hot-pluggable
	64 bit, up to
	100 MHz.
6400	Bus 1: PCI slot 1 is	Install in any available	Install in any available PCI slot.	If you are currently
	32 bit, 33 MHz.	32-bit, 33-MHz or 64-bit,	Dell recommends installing Emulex	using a DRAC II
	Bus 2: PCI slots 2	33-MHz PCI slot.	cLAN adapters in 64-bit slots.	or plan to use one
				in the future,
	through 5 are
				install the DRAC
	64 bit, 33 MHz.
				II in PCI slot 1.
	Bus 3: PCI slots 6
	and 7 are 64 bit,
	33/66 MHz.

6450	Bus 1: PCI slot 1 is
	32-bit, 33 MHz.

Bus 2: PCI slots 2 through 5 are

64 bit, 33 MHz.

Bus 3: PCI slots 6 and 7 are 64 bit, 33/66 MHz.

Install in any available	Install in any available PCI slot.
32-bit, 33-MHz or 64-bit,	Dell recommends installing Emulex
33-MHz PCI slot.	cLAN adapters in 64-bit slots.

If you are currently using a DRAC II or plan to use one in the future, install the DRAC II in PCI slot 1.

Platform Guide

1-7