Adjusting the Flash Output
In D mode, you can choose 3 levels of flash output.
Set the camera to Dmode.
Choose the flash output.
●After pressing the m button, press the op buttons to choose ~.
Make the setting.
●Press the qrbuttons or turn the Âdial to choose an option, then press the m button.
• To set the flash output, choose [Flash Control] (p. 97) from the 4tab, then choose [Flash Exp. Comp] and press the qrbuttons to choose a setting (p. 49).
•In Mand Bmodes, you can set the flash output if you choose the 4 tab, then [Flash Control] and set the [Flash Mode] option to [Manual].
99