USB Downstream Connector

USB Ports

l1 upstream - back
l2 downstream at back & 2 downstream at bottom
Camera - MIC Specifications

Overview

The integrated USB camera and analog microphones allow you to take pictures, videos, and communicate with other computer users. The camera is located at
the top of the monitor and is fixed. However, the camera’s software--Dell Webcam Software suite, provides limited panning abilities. When the camera is on,
the white light next to the camera turns on.

System Requirements

The following are the minimum system requirements for the Dell Webcam Software Suite:
lIntel®Pentium®4 or AMD®equivalent processor running at 2.4 GHz or higher
(Recommended: Intel Pentium Core 2 Duo E4300 or AMD equivalent processor running at 2.8 GHz with Hyper-Threading enabled)
lMicrosoft®Windows®XP Service Pack 2 or Windows Vista®
l256 MB RAM (2 GB RAM or higher recommended)
l580 MB free hard disk space
Pin Number
4-pin Side of the connector
1
DMU
2
VCC
3
DPU
4
GND
Pin Number
4-Pin Side of the Signal Cable
1
VCC
2
DMD
3
DPD
4
GND
NOTE:USB2.0functionalityrequiresaUSB2.0-
capablecomputer
NOTE:
to resume normal functionality.
Lens
Field of view
66.2 degree +/- 5 %
Focus mode
Fixed Focus
Focus area
37 cm~Infinity
Focusingdistance(normalmode)
1.100 mm
Image Sensor
Active array size
2.0 mega-pixel
Video specification
Video frame rate
1600 x 1200 (UXGA) - up to 10 frames per second
640 x 480 (VGA) and below - up to 30 frames per second
Image flip
Horizontally
Digital zoom
2x
Audio Specification
Microphone type
Dual Microphone
Interface
USB 2.0 high Speed
Power Supply
3.3 volts +/- 5%