Table 3. Expansion Card Installation Order

Card Priority

Card Type

Slot Priority

Maximum Allowed

 

 

 

 

1

GPU

3

1

2

External RAID

1, 4, 3, 6

1

3

Internal RAID

6, 4, 3, 1

1

4

10 Gb NICs

4, 3, 6

3

5

FC8 HBA

4, 3, 1, 6

4

6

CNAs

4, 3, 1, 6

4

7

1 Gb NICs

2, 4, 3, 1, 6

5

8

Non-RAID

4, 3, 1, 6

1

9

Internal tape adapter

2, 4, 3, 1, 6

1

NOTE: If you are installing a double-width GPU card in slot 3, you cannot install an expansion card in slot 2.

GPU Card Installation Guidelines

Ensure that the GPU cable is available.

The system supports one single- or double-width GPU card in PCIe slot 3.

Only single-width GPU Q4000 and dual-width GPU Q6000 are supported.

Systems installed with the double-width GPU card supports only one 5.25 inch removable media storage device.

The GPU card must be installed on a system with a redundant 750 W AC power supply.

The GPU card power cable must be connected to the GPU power connector CN11 on the power distribution board.

Removing An Expansion Card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.

2.If applicable, rotate the system feet inward and lay the system on its side on a flat, stable surface.

NOTE: For systems installed with the wheel assembly, ensure that you lay the system on a sturdy, stable surface with the wheel assembly extending off the edge of the surface.

3.Open the system.

4.If applicable, remove the PCIe card holder.

5.If applicable, press and disconnect the two SAS cables from the expansion card.

6.If applicable, disconnect the P3 power cable from the system board.

7.From inside the system, press and push out the expansion card release latch to open it.

8.Holding the card by its edge, pull the card to disengage from the connector and lift the card out of the chassis.

9.If you are removing the card permanently, install a filler bracket in the empty card slot.

86

Page 86
Image 86
Dell T320 owner manual GPU Card Installation Guidelines, Removing An Expansion Card

T320 specifications

The Dell PowerEdge T320 is a versatile tower server designed to meet the needs of small to medium-sized businesses. It is engineered to handle a variety of workloads, from data storage and virtualization to basic web serving and productivity applications. With a blend of performance, reliability, and expandability, the T320 serves as a robust solution for organizations looking to enhance their IT infrastructure.

One of the standout features of the T320 is its use of Intel's Xeon E5-2400 series processors, which deliver outstanding computing power and efficiency. Supporting up to two processors, this tower server can be configured to handle demanding tasks effectively. The ability to support up to 768GB of DDR3 memory through its 12 DIMM slots ensures that the T320 can manage memory-intensive applications, making it well-suited for data analytics and virtualization.

Storage capacity is another significant advantage of the T320. It comes equipped with up to eight 3.5-inch drives, which can be configured for RAID to enhance data protection and performance. The server supports both SATA and SAS drives, allowing for a range of options when it comes to speed and capacity. Additionally, a built-in PERC controller facilitates RAID configuration and monitoring, providing an additional layer of security for critical data.

The T320's design focuses on scalability, featuring several expansion slots for PCIe add-in cards. This allows businesses to grow their server capabilities over time, adding components such as graphics cards or network interface cards as needed. Furthermore, the server includes integrated 1GB Ethernet ports, facilitating easy connectivity within a network.

In terms of management and monitoring, the Dell PowerEdge T320 features the integrated Dell Remote Access Controller (iDRAC), which provides out-of-band management capabilities. This allows IT administrators to remotely manage and monitor server health and performance, reducing the need for physical access and streamlining maintenance tasks.

Moreover, the T320 emphasizes energy efficiency. With Dell's Energy Smart technologies, the server is designed to minimize power consumption and heat production while maintaining high performance. This not only contributes to lower operational costs but also supports environmentally friendly practices.

Overall, the Dell PowerEdge T320 is an efficient and reliable tower server that provides businesses with the performance and flexibility needed to manage various workloads. Its robust features, combined with Dell's commitment to quality and service, make it a valuable asset for companies looking to improve their IT operations.