6.Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your computer.
7.When the Dell Diagnostics Main Menu appears, select the test you want to run.
Dell Diagnostics Main Menu
1. After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the option you want.
Option | Function |
Express | Performs a quick test of devices. This test typically takes 10 to 20 minutes and requires no interaction on |
Test | your part. Run Express Test first to increase the possibility of tracing the problem quickly. |
Extended | Performs a thorough check of devices. This test typically takes 1 hour or more and requires you to answer |
Test | questions periodically. |
Custom | Tests a specific device. You can customize the tests you want to run. |
Test |
|
Symptom | Lists the most common symptoms encountered and allows you to select a test based on the symptom of the |
Tree | problem you are having. |
2.If a problem is encountered during a test, a message appears with an error code and a description of the problem. Write down the error code and problem description and follow the instructions on the screen.
3.If you run a test from the Custom Test or Symptom Tree option, click the applicable tab described in the following table for more information.
Tab | Function |
Results | Displays the results of the test and any error conditions encountered. |
Errors | Displays error conditions encountered, error codes, and the problem description. |
Help | Describes the test and may indicate requirements for running the test. |
Configuration Displays your hardware configuration for the selected device.
The Dell Diagnostics obtains configuration information for all devices from system setup, memory, and various internal tests, and it displays the information in the device list in the left pane of the screen. The device list may not display the names of all the components installed on your computer or all devices attached to your computer.
Parameters | Allows you to customize the test by changing the test settings. |
4.When the tests are completed, if you are running the Dell Diagnostics from the Drivers and Utilities disc, remove the disc.
5.Close the test screen to return to the Main Menu screen. To exit the Dell Diagnostics and restart the computer, close the Main Menu screen.
Power Button Light Codes
The diagnostic lights give much more information about the system state, but legacy power light states are also supported in your computer. The power light states are shown in following table.
Power
Light
State
Off
Blinking Amber
Solid Amber
Description
Power is off, light is blank.
Initial state of light at power up.
Indicates system has power, but the POWER_GOOD signal is not yet active.
If the Hard Drive light is off, it is probable that the power supply needs to be replaced.
If the Hard Drive light on, it is probable that an onboard regulator or VRM has failed. Look at the diagnostic lights for further information.
Second state of the light at power up. Indicates the POWER_GOOD signal is active and it is probable that
