Security
Supervisor Password Is | Specifies whether a supervisor password has been |
| assigned. |
|
|
User Password Is | Specifies whether a user password has been |
| assigned. |
|
|
Set Supervisor Password | Allows you to set a supervisor password. |
|
|
Set User Password | Allows you to set a user password. You cannot use |
| the user password to enter the BIOS setup, during |
| POST. |
|
|
Set HDD Password | Allows you to set a password on the computer's |
| internal hard drive (HDD). The hard drive password is |
| enabled even when the hard drive is installed on |
| another computer. |
|
|
Password on Boot | Enable or disable authentication every time your |
| computer boots. |
Set Service Tag | Allows you to set a service tag when the system |
| board is replaced. |
Service Tag | Displays the current service tag of the computer. |
Asset Tag | Displays the asset tag. |
|
|
Boot
The Boot tab allows you to change the boot sequence.
Exit
This section allows you to save, discard, and load default settings before exiting from System Setup.
Back to Contents Page
