NOTE: The printer does not support printing files from your computer using a Bluetooth
connection.
You need to set up a connection between a Bluetooth-enabled device and your printer if you are
sending a print job from the Bluetooth device for the first time. You will need to repeat the setup if:
You reset the printer to its factory default settings. For more information, see Restoring
Factory Default Settings.
You changed the Bluetooth security level or the Bluetooth pass key. For more information, see
Setting the Bluetooth Security Level.
The Bluetooth-enabled device you are using requires users to set up a Bluetooth connection on
every print job. Refer to the instructions included with the device for Bluetooth printing
information.
You cleared the contents of the Bluetooth device list. For more information, see Bluetooth
Mode.
The name of the Bluetooth device you are using is automatically deleted from the Bluetooth
device list.
When the Bluetooth security level is set to High, the printer saves a list of up to 8 Bluetooth
devices that have previously set up a connection with the printer. If there are already 8
devices on the list, and then you need to set up a connection for another Bluetooth device, the
first device is automatically deleted from the list so that the new device can be stored. You
need to repeat the setup of the deleted device to be able to send a print job to the printer.
NOTE: You need to set up a connection for each Bluetooth device that you will use to send a print
job to the printer.
To set up a connection between the printer and a Bluetooth-enabled device:
1. Turn on the printer.
2. Insert a USB Bluetooth adapter into the USB port located on the front of the printer.