Dell Precision WorkStations

Safety and Regulatory

Information

This chapter contains information about safety precautions to observe when using your Dell Precision WorkStation and regulatory notices.

Safety Instructions

Use the following safety guidelines to help protect your computer system from potential damage and to ensure your own personal safety.

When Using Your Computer System

As you use your computer system, observe the following safety guidelines.

CAUTION: Do not operate your computer system with any cover(s) (includ- ing computer covers, bezels, filler brackets, front-panel inserts, and so on) removed.

To help avoid damaging your computer, be sure the voltage selection switch on the power supply is set to match the AC power available at your location:

— 115V for most of the Americas, Japan, South Korea, and Taiwan

NOTE: The AC power available in Japan is 100 volts (V), but the voltage selection switch must be set to the 115V position.

230V for most of Europe, the Middle East, and the Far East

Also be sure that your monitor and attached peripherals are electrically rated to operate with the AC power available in your location.

Before working inside the computer, unplug the system to help prevent electric shock or system board damage. Certain system board components continue to receive power any time the computer is connected to AC power.

Verify that the system board’s standby light-emitting diode (LED) is not on. If it is on, you may need to wait 10 to 30 seconds for it to go out.

support.dell.com

Dell Precision WorkStations Safety and Regulatory Information

2-1

Page 11
Image 11
Dell MMP, WCP, WCM manual Safety Instructions, When Using Your Computer System