INSTALLATION INSTRUCTIONS
WARNING!
THIS APPLIANCE HAS TO BE INSTALLED BY A QUALIFIED INSTALLER. Installation must conform with local codes.
Improper installation, adjustment, alteration, services, or maintenance can cause injury or property damage. Consult a qualified installer or service agent. IMPORTANT: The use of suitable protective clothing/gloves is recommended when handling, installing of this appliance.
WARNING: When correctly installed, your product meets all safety requirements laid down for this type of product category.
However special care should be taken around the rear or the underneath of the appliance as these areas are not designed or intended to be touched and may contain sharp or rough edges, that may cause injury.
GENERAL INFORMATION
1.Installation must conform with local codes.
2.WARNING: This appliance shall not be used for space heating. This information is based on safety considerations.
3.Keep appliance area clear and free from combustible materials, gasoline, and other flammable vapors.
4.Disconnect the electrical supply to the appliance before servicing.
5.When removing appliance for cleaning and/or service;
A.Disconnect AC power supply.
B.Carefully lift appliance out of cabinet cutout. CAUTION: Use care in handling.
6.Electrical Requirement
Electrical installation should comply with national and local codes.
WARNING!!
ELECTRICAL GROUNDING INSTRUCTIONS
The appliance must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA No.
For personal safety, this appliance must be properly grounded.
REPLACEMENT PARTS
Only authorized replacement parts may be used in performing service on the appliance. Replacement parts are available from factory authorized parts distributors. Contact the nearest parts distributor in your area.
23
