DeLonghi D24527 manual Filling With Oil Or Fat, Preheating, Programming The Deep Fryer

Meijer.com

FILLING WITH OIL OR FAT

•Remove the cover (O), lifting it by the handle. Turn the basket handle until it locks into place (pos. 2, fig. 2). Remove the basket (S) by pulling upwards.

•From the cord storage (U) (if present), pull out the length of cord required to connect the appliance to the outlet (see fig. 4A). “320°f” will appear on the display (A) and the deep fryer emits a beep when plug- ged into the outlet.

If the deep fryer has a cord with magnetic connector:

First, connect the magnetic connector to the appliance (fig. 4B) making sure the protruding part of the connector (X) is facing downwards. Then plug the cord into the outlet.

•If oil is used, pour it into the bowl (R) until it reaches the maximum level indicated (see fig. 5). Never exceed this limit as oil might overflow from the bowl.

The level of oil should always be between the maximum and minimum marks (H). For best results, use good quality canola oil.

•If lumps of fat are used, cut the lumps into pieces and melt them in another container, then pour the mel- ted fat into the deep fryer bowl. Never melt the fat in the basket or on the deep fryer heating element (see Fig. 6).

•Replace the cover (O).

•If traces of food are left in the oil, these should be removed before heating to prolong the life of the oil.

PREHEATING

Place the food to be fried in the basket (S), without overfilling (max.3lb) (1.3 kg).

Make sure the handle of the basket is correctly positioned (position 2, fig. 2).

PROGRAMMING THE DEEP FRYER

Use the “-/+” buttons (B) to set the temperature from 285°F to 375°F. Pressing the button once decreases or increases the temperature by 5°F (3°C).

Use the MODE (C) button to access the temperature or time settings.

Use the “-/+” buttons (B) to adjust cooking time from 0 to 60 minutes.

Pressing the button once decreases or increases time by 30 seconds.

After setting the temperature and time, press the ON/OFF button (D) (if the time has not been set, the deep fryer will not begin the heating process). The deep fryer begins the heating process. The red POWER light (E) comes on. During this process, you can still modify temperature and cooking time using the “-/+” buttons (B) and the MODE (C) button to modify the selec- tion.

When the appliance reaches the set temperature, the green READY light (F) comes on and the deep fryer emits two “beeps”.

7