DeLonghi D24527 manual Important Safeguard, Description, Thermal Cut-Outdevice, Instructions

Meijer.com

IF THE DEEP FRYER HAS A CORD WITH MAGNETIC CONNECTOR

First, connect the magnetic connector to the appliance as shown in figure 4B, making sure the protruding part of the connector (X) is correctly inserted into the corresponding outlet on the appliance. Then plug the cord into the outlet.

Warning

Never leave the appliance plugged into the outlet if the magnetic connector is not fitted to the deep

fryer, figure 3. If the magnetic connector does not remain in place, check that it has been inserted cor- rectly, (see figure 4B). If the problem persists, con- tact an authorized service center. When the appliance is in operation, always leave free space around the magnetic connector to prevent it from becoming detached. Use type LM-132 cords provi- ded by a De'Longhi authorized service center only.

IMPORTANT SAFEGUARD

A DEEP FRYER FALLING FROM A HIGH PLACE MAY KEEP OUT OF REACH OF CHILDREN CAUSE SERIOUS BURNS. NEVER LEAVE THE CORD

HANGING FROM THE EDGE OF THE SURFACE THE DEEP FRYER IS RESTING ON WHERE IT COULD BE GRASPED BY A CHILD OR GET IN THE WAY OF THE

USER. DO NOT USE EXTENSION CORDS.

DESCRIPTION

A. Display		L.	Housing
B. “-/+” buttons to decrease/increase time and		M.	Handle
	temperature	N.	Control unit guide
C. MODE button to select time/temperature modes		O.	Cover with handle
D.	ON/OFF button	P.	Viewing window
E.	Red POWER light	Q.	Filter (if present)
F.	Green READY light	R.	Removable bowl
G.	Safety microswitch	S.	Basket with folding handle
H.	Min/max oil level indicator	T.	Heating element
I.	Basket support	U.	Cord storage compartment (if present)
J.	Oil drain tap (not on all models)	V.	Thermal cut-out device reset button

K.Oil drain tap cover (not on all models)

THERMAL CUT-OUT DEVICE

The appliance is fitted with a thermal cut-out device which interrupts heating in the event of incorrect use or faulty operation. Once the appliance has cooled down, use a toothpick to delicately press the thermal cut- out device reset button (V) (see fig. 1). If the appliance is still not operational, contact a service center autho- rized by the manufacturer.

INSTRUCTIONS

Before using the deep fryer for the first time, clean the basket, bowl and cover thoroughly with hot water and detergent. The control unit with power cord and heating element can be cleaned with a damp cloth. Check that water does not enter into the control unit and that there is no water left in the bottom of the removable bowl. Dry all parts thoroughly. Make sure the control unit is correctly fastened to the deep fryer body. The safety micro-switch (G) will prevent the appliance from operating unless the control unit is correctly positio- ned in the guide (N). The deep fryer is now ready for use.

6