CLEANING
•Always switch off, unplug and dismantle before cleaning.
•Empty the carafe before unscrewing it from the blade unit.
•Do not place any parts in the dishwasher.
•Any other servicing should be performed by an authorized service representative.
Power unit
•Wipe with a damp cloth, then dry.
•Store excess cord in the storage area at the back of the power unit (6).
Blade unit
1Remove the blade unit from out of the carafe by turning clockwise to release.
2Remove and wash the sealing ring.
3Don’t touch the sharp blades – brush them clean using hot soapy water, then rinse thor- oughly under the tap. Don’t immerse the blade unit in water.
Other parts
Wash by hand, then dry.
TROUBLESHOOTING
Problem | Cause/Solution |
The blender is plugged in but there is no power.
Make sure lid and base are both locked into position. If they are not both in place, the unit will not work.
The blade unit is difficult to remove.
Make sure hands are completely dry and turn the blade unit clockwise. If it is still difficult to remove, try using a silicon jar opener to help with the grip.
The carafe is leaking from the bottom.
The sealing ring is not in place or the blade unit is not locked tight enough. Ensure that the sealing ring is in tacked and the blade unit is fully locked.
The carafe is leaking from the top. | The carafe is filled beyond capacity. |
Consistency of blending is unsatisfactory.
The mixture may have too much ice or may be too thick. Slowly add more liquid to the mixture until the desired consistency is achieved.
7
