DeLonghi DEDW60SI manual De’Longhi’s Safety Precautions Troubleshooting, Result, Error Codes

De’Longhi’s Safety Precautions

Troubleshooting

De’Longhi pride themselves on their innovative range of the highest quality consumer products.

De’Longhi ensures all of its products are 100% safe through quality design and manufacture. All products meet or exceed stringent laboratory-tested safety requirements.

It is necessary for anyone using an electrical appliance to be safety conscious. The following precautions are essential for the safe use of an electrical appliance. Carefully read all of the instructions provided with your appliance:

ŸAlways turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the plug, do not pull on the cord.

ŸDo not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person. The extension cord must be a VDE-Listed, 3-wire grounding extension cord that has a grounding plug and outlet and that the electrical rating of the cord is 220-240 volts and at least 10 amperes.

ŸAlways use your appliance from a power outlet of the voltage (A.C. only) marked on the appliance.

ŸDo not use an appliance for any purpose other than its intended use.

ŸDo not attempt to repair an electrical appliance. Return a damaged or malfunctioning appliance to a qualified service centre for adjustment or repair if required.

ŸThe appliance must be positioned so the AC plug is accessible.

ŸThis appliance is designed exclusively for household use. All other uses are strictly forbidden.

ŸThe appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

ŸIf the power cable is damaged, it must be replaced by the manufacturer, an authorised service centre or a qualified electrician in order to eliminate all risk.

	Problem	Possible Causes	Solution
	The dishes	The dishes were not	See notes in " Loading the Dishwasher Baskets ".
	are not clean	loaded correctly.
result
		The program was	Select a more intensive program.
		not powerful enough.	See" Wash Cycle Table ".
		Not enough detergent	Use more detergent, or change your detergent.
washing		The filter combination	Clean and/or fit the filter combination correctly.
		was dispensed.
		Items are blocking	Rearrange the items so that the spray can rotate freely.
		the path of spray arms.
Unsatisfactory		in the base of wash	Clean the spray arm jets. See "Cleaning the Spray
		detergent.	them clean.
		cabinet is not clean or	Arms".
		is not correctly fitted.
		This may cause
		the spray arm jets
		to get blocked.
	Cloudiness	Combination of soft	Use less detergent if you have soft water and select
	on glassware	water and too much	a shortest cycle to wash the glassware and to get
	Black or gray	Aluminum utensils have	Use a mild abrasive cleaner to eliminate those marks.
	marks on dishes	rubbed against dishes.
	Detergent left in	Dishes block	Re-loading the dishes properly.
	dispenser cups	detergent cups.
	The dishes are	Improper loading	Load the dishwasher as suggested in the directions.
	not drying
		Too little rinse-aid	Increase the amount of rinse-aid/refill the rinse-aid
			dispenser.
Unsatisfactory resultsdrying
		Dishes are removed	Do not empty your dishwasher immediately after
		too soon	washing. Open the door slightly so that the steam can
			escape. Begin unloading the dishwasher only once t
			he dishes are barely warm to the touch. Empty the low
			basket first. This prevents water form dropping off
			dishes in the upper basket.
		Wrong program	In short program the washing temperature is lower.
		has been selected	This also lowers cleaning performance. Choose
			a program with a long washing time.
		Use of cutlery with	Water drainage is more difficult with these items.
		a low-quality coating	Cutlery or dishes of this type are not suitable for
			washing in the dishwasher.

ERROR CODES

When some malfunctions occur, the appliance will display error codes to warn you:

Codes	Meanings	Possible Causes
E1	Longer inlet time.	Faucets is not opened, or water intake is restricted, or water
		pressure is too low.
E3	Longer heating time, but not	Malfunction of temperature sensor or of heating element.
	reaching required temperature.
E4	Overfilled.	Too much inlet water.
E6	Failure of temperature sensor.	Open circuit or break of temperature sensor.
E7	Failure of temperature sensor.	Short circuit or break of temperature sensor.

WARNING!

ŸIf overflow occurs, turn off the main water supply before calling a service.

ŸIf there is water in the base pan because of an overfill or small leak, the water should be removed before restarting

the dishwasher.

Page 4 Page 25