DeLonghi DEDW60SI Full 3/4 Full 1/2 Full 1/4 Full, Empty, Before Startingthe Dishwasher, Page

Models: DEDW60SI

1 14
Download 14 pages 14.91 Kb
Page 12
Image 12
BEFORE STARTINGTHE DISHWASHER

Using Your Dishwasher

Using Your Dishwasher

BEFORE STARTINGTHE DISHWASHER

The following things should be checked before starting the dishwasher.

As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes, as illustrated below.

WARNING!

Ÿ Do not let any item extend through the bottom.

When loading the dishes and cutlery, please note:

Ÿ Dishes and cutlery must not impede the rotation of

the spray arms.

1.That the dishwasher is level and fixed properly.

2.That the inlet valve is open .

3.That there is no leakage at the connections of the conducts.

4.The wires are tightly connected and the power is switched on.

5.That the inlet and drain hoses are not knotted or kinked.

6.All packing materials should be taken out of the dishwasher.

 Full Full

 Empty 3/4 Full

C (Rinse-Aid indicator) 1/2 Full PRIORTO USING FORTHE FIRSTTIME 1/4 Full

(Should refill to eliminate spotting)

Fill the Rinse Aid Dispenser Empty

C (Rinse-Aid indicator)

MIN

ŸAlways load sharp utensils with the sharp point down!

Suitability of items for use in your Dishwasher

NOT SUITABLE FOR USE

Ÿ Cutlery with wooden, horn china or m o t h e r - o f -

pearl handles.

Ÿ Plastic items that are not heat resistant.

Ÿ Older cutlery with glued parts that are not

temperature resistant.

Ÿ Load hollow items such as cups, glasses, pans etc.

with the opening downwards so that water cannot

collect in the container or a deep base.

Ÿ Dishes and items of cutlery must not lie inside one

another, or cover each other.

Ÿ To avoid damage to glasses, they must not touch.

Ÿ Load large items which are most difficult to clean

into the lower rack.

Ÿ The upper rack is designed to hold more delicate

and lighter dishware such as glasses, coffee and

tea cups.

PRIORTO USING FORTHE FIRSTTIME

Before using your dishwasher for the first time:

Fill the Rinse Aid Dispenser

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your

How to fill the Rinse Aid Dispenser

1.To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.

2.Pour the rinse aid into the dispenser, being careful not to overfill.

3.Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.

Ÿ Bonded cutlery items or dishes.

Ÿ Pewter or copper items.

Ÿ Crystal glass.

Ÿ Steel items subject to rusting.

Ÿ Wooden platters.

Ÿ Items made from synthetic fibres.

ATTENTION!

ŸLong bladed knives stored in an upright position are a potential hazard!

ŸLong and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.

Damage to glassware and other dishes

dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black. The volume of the rinse aid container is about 140ml.

Function of the Rinse Aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

WARNING!

Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances (e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.

When to refill the Rinse Aid Dispenser

1

3

2

LIMITED SUITABILITY

ŸSome types of glasses can become dull after a large number of washes.

ŸSilver and aluminum parts have a tendency to discolour during washing.

ŸGlazed patterns may fade if machine washed frequently.

NOTE:

ŸDo not put in items that are dirty with cigarette ash, candle wax, lacquer or paint.

ŸIf you buy new dishes please make sure that they are suitable for dishwashers.

ŸPlease do not overload your dishwasher. Do not use dishes that are not suitable for dishwashers. This is important for good results and for reasonable energy consumption.

Possible Causes

ŸType of glass or manufacturing process. Chemical composition of detergent.

ŸWater temperature and duration of dishwasher program.

Suggested remedy:

ŸUse glassware or porcelain dishes that have been marked dishwasher-proof by the manufacturer

ŸUse a mild detergent that is described as kind of dishes If necessary, seek further information from detergent manufacturers.

ŸSelect a program with as low a temperature.

ŸTo prevent damage, take glass and cutlery out of the dishwasher as soon as possible after the program has ended. as possible after the program has ended.

If there is no rinse-aid warning light in the control panel, you can judge the amount of rinse-aid by the color of the optical level indicator "C" located next to the cap. When the rinse-aid container is full, the whole indicator will be dark. As the rinse-aid diminishes, the size of the dark dot decreases. You should never let the rinse aid get below 1/4 full.

Be careful not to overfill the dispenser, because this could cause over sudsing. Wipe away any spills with a damp cloth. Don't forget to replace the cap before you close dishwasher door.

ATTENTION! Clean up any rinse aid split during filling with an absorbent cloth to avoid excess foaming during the next wash.

Before loading the dishes, you should:

ŸRemove large food particles.

ŸSoften remnants of burnt food in pans.

Page 12

Page 17

Page 12
Image 12
DeLonghi DEDW60SI Full 3/4 Full 1/2 Full 1/4 Full, Empty, Before Startingthe Dishwasher, Priorto Using Forthe Firsttime