Using Your Dishwasher
Using Your Dishwasher
How to fill the Rinse Aid Dispenser
1.To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
2.Pour the rinse aid into the dispenser, being careful not to overfill.
3.Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.
1 |
Loading the Lower Basket
We recommend that you place large items which are most difficult to clean into the lower basket: pots, pans, lids, serving dishes and bowls, as shown in the figure below.
It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the rotation of the top spray arm.
ŸPots, serving bowls, etc. must always be placed top down.
ŸDeep pots should be slanted to allow water to flow out.
ŸThe bottom basket features folding spikes so that larger or more pots and pans can be loaded.
Folding spikes
For better stacking of pots and pans, the spikes can be folded down as show in the picture below.
2 |
Be careful not to overfill the dispenser, because this could cause over sudsing. Wipe away any spills with a damp cloth. Don't forget to replace the cap before you close dishwasher door.
ATTENTION! Clean up any rinse aid split during filling with an absorbent cloth to avoid excess foaming during the next wash.
IN 6
4
5
7
4
5
4 | - Dessert dishes | 5 | - Soup plates |
6 | - Dinner plates | 7 | - Cutlery basket |
Page 14 | Page 19 |