Selected power | MAX | MAX | MAX | MAX |
|
Power used | MAX | MED | MIN | OFF | fig. 2 |
The appliance will turn on automatically again when the room temperature falls below the selected temperature level.
If a power level below “P max” has been selected using the “ON/OFF” button, the appli- ance will modulate between the selected level and the lower power levels.
ANTIFREEZE FUNCTION
Press the “ON/OFF” button to select the “P max” power level. Set the thermostat dial to the “*” position (Fig. 1).
When set in this way, the appliance will turn on automatically only if the room temperature falls below 42°F (5°C), to prevent it from freezing at minimum energy consumption.
This function is not guaranteed in the event of black outs, even if lasting just a few seconds.
MODELS WITH ROTATING BODY
This appliance is fitted with a motorized base and a rotating body.
To distribute the air flow over a larger area, push the foot switch (Fig. 3). When activated, the appliance will oscillate from right to left over an angle.
To stop the appliance in the desired position, simply push the foot switch again (a beep will confirm the selection)
Fig. 3
MODELS WITH REMOTE CONTROL
Some models are equipped with a remote control to provide ease of operation. The appliance can be completely controlled with the remote control.
Two AAA 1,5V batteries are required (not included):
•remove the cover located on the back side of the remote control;
•insert the two AAA 1,5V batteires positioning them correctly (see the instructions in the batteries compartment);
•replace the cover.
6
