outlets also deteriorate due to aging and continuous use: check periodically if signs of overheating or deformations are evidenced by the plug. Do not use the outlet and CALL your electrician.
19.Check that neither the appliance nor the power cord have been damaged in any way during transportation.
20.CAUTION: to prevent electric shock match wide blade of plug to wide slot, fully insert.
21.Do not cover the appliance while it is functioning in order to avoid overheating with the attendant risk of fire.
SAVE THESE INSTRUCTIONS
Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
Voltage Wattage
See rating label
CAUTION
-Always use the heater in an upright position.
-Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles (danger of overheating).
-The appliance must be installed so that the switches and other controls cannot be rea- ched from a person standing in a bathtub or a shower.
-The electrical feed cord must be replaced only by officially authorised personnel.
ELECTRIC POWER CONNECTION
The fan heater must be connected to a properly polarized A/C 110/120 V household out- let in perfect working condition.
Keep loose clothing or bedding, furniture and flammable material away from the wall outlet where the heater is plugged in.
INSTALLATION
The fan heater can be easily positioned on any horizontal support surface in an upright position.
FAN HEATER CONTROLS:The thermostat will adjust the set temperature automatically and keep it constant.
These two LEDs indicate the selected power level
ON/OFF button
thermostat dial
ventilation only | Fig. 1 |
As the appliance cycles between the different power levels when it is in use, these two LEDs indicate the level currently in use
4
