Installing memory
Issue 3.3 February 2003 201
Installing memory

Overview

The Ultra 5 comes equipped with one bank of dual inline memory modules (DIMMs) (256
MB) installed. If you need to install additional DIMMs, they must be installed in full banks
(pairs).
Opening the computer
To open the Ultra 5 computer:
1. If you have not already done so, enter the following command to shut down the
computer:
/usr/sbin/shutdown -y -i0 -g0
2. Turn off the power to the computer.
3. Remove the two screws on the back of the unit that secure the cover to the chassis.
See the following figure.
4. Slide the cover back 1 or 2 inches and lift it up away from the chassis.
5. Place the cover in a convenient location so that it does not interfere with your work.
CoverTabs
Cover
Screws
u5
_
remove
_
cover.cdr