Using the remote console
Issue 3.3 February 2003 155
2. At the remote console, enter:
/cms/install/bin/abcadm -r ttyb
The following message is displayed at the remote console:
3. At the remote console, enter: y
The following message is displayed at the remote console:
4. At the remote console, enter:
/cms/install/bin/abcadm -c -b 9600 ttyb
The following message is displayed at the remote console:
5. At the remote console, enter: y
The following message is displayed at the remote console:
The following occurs:
●The system begins to shut down.
●Shutdown, reset, and reboot messages are displayed on the local console.
●When the system starts to come back up, the local console goes blank.
●The system boot diagnostics are displayed on the remote console.
●After the system reboots, a console login: prompt is displayed on the remote
console.
6. Log in to the remote console as root.
!
CAUTION:
CAUTION: Do not enter Ctrl+D from the remote console to exit the system without first
redirecting control back to the local console. If you do, you may lock yourself
from using the console locally or remotely.
ttyb is currently set to be incoming
Are you sure you want to change it? [y,n,?]
ttyb administration removed
This change requires a reboot to take affect
Are you ready to reboot? [y,n,?]
done
desktop auto-start disabled
Proceeding to reboot.