Setting the remote console modem options
Issue 3.3 February 2003 55
Setting the Dial_Line strap group
1. Press the Right Arrow three times to get to the “Dial_Line” strap group. Nothing needs
to be changed for CMS in the “DTE_Dialer” or “Line_Dialer” strap groups, so you can
skip them.
2. Press F1 to edit the “Dial_Line” strap group.
“Dial Line Rate” is displayed.
3. Press the Right Arrow four times for “9600(V32b).”
4. Press F2 to select “9600(V32b).”
5. Press F1 for “Nxt.”
“V32bis Automode (Enable)” is displayed.
6. Press F1 for “Nxt.”
“V32bis Autorate (Enable)” is displayed.
7. Press F1 for “Nxt.”
“Dial Tx Level (Permissv (-9))” is displayed.
8. Press F1 for “Nxt.”
“V22b Guard Tone (Disable)” is displayed.
9. Press F1 for “Nxt.”
“V32bis Train (Long)” is displayed.
10. Press F1 for “End.”
“Edit StrapGroup” is displayed. The other strap groups (“V42/MNP/Buffer,” “Test,”
“Misc,” and “Security”) are not changed for CMS.
Saving your settings
1. Press the Single Up Arrow to display “Choose Function” and “Edit Save.”
2. Press F3 to select “Save.”
“Save EditArea to” is displayed.
3. Press F1 to select “Active(Saved).”
“Command Complete” is displayed.
4. Press the Single Up Arrow again to display “Save EditArea to.”
5. Press the Right Arrow once to select “Customer 1.”
6. Press F1 to save to “Customer 1.”
“Command Complete” is displayed.