Tools

The following table describes the LED combinations that occur during normal tape drive operation.

 

 

 

Tape drive state

 

 

 

 

 

 

 

 

 

 

Activity

Activity

Cartridge

Media

Fault

Power-on

 

(load or

(read or

loaded

Caution

 

(starts with

 

unload)

write)

 

Signal

 

two steady

 

 

 

 

 

 

lights)

 

 

 

 

 

 

 

Tape LED

Flashing

Flashing

On

Any

Any

Flashing

(green)

 

Fast

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clean LED

Off

Off

Off

Flashing

On

Off

(amber)

 

 

 

 

 

 

 

 

 

 

 

 

 

The tape drive monitors the number of correctable errors that occur during reading and writing. If the number of errors becomes excessive, the tape may be nearing the end of its useful life, or the tape heads may need cleaning.

If the media caution signal displays (flashing amber), clean the tape drive.

If the signal still displays after cleaning the heads, repeat the operation with a different tape. If this clears the signal, the first tape is nearing the end of its life. Copy the data onto a new tape and discard the old one.

The media caution signal is cleared when a new tape is loaded or when the drive is power- cycled.

SLR5 tape drive – The SLR5 tape drive has a single LED that displays both green and red. The tape drive LED shows the following status:

Steady green when a tape is in the tape drive. If this occurs when you first insert a cleaning cartridge, use a new cleaning cartridge.

Flashing green when tape drive activity is occurring.

Flashing red when a fault occurs. When this happens, eject the tape and reinsert the tape. If this continues to occur, the tape is faulty and should be replaced.

XL/XS/DX tape drive – The tape drive LEDs show the following status:

Top LED (amber) — When this LED is on or flashing, the tape drive has an error or needs cleaning (see Cleaning the tape drive on page 136).

Middle LED (green) — When this LED is on or flashing, SCSI bus activity is occurring.

Bottom LED (green) — When this LED is on, a tape is loaded. When this LED is flashing, it indicates that tape motion is occurring or the tape drive needs cleaning.

Issue 3.3 February 2003 175

Page 175
Image 175
Avaya 585-215-871 manual Tape drive state Activity, Fault, Load or, Loaded, Unload, Signal Two steady Lights

585-215-871 specifications

The Avaya 585-215-871 is a versatile and robust solution designed to cater to the dynamic needs of modern communications. This device is a critical component in Avaya’s extensive lineup, aimed at enhancing collaboration through advanced communication technologies. With an emphasis on flexibility, security, and integration, the 585-215-871 is built for businesses looking to streamline their communication processes.

One of the primary features of the Avaya 585-215-871 is its support for high-definition voice quality, ensuring that conversations are clear and intelligible. This feature is crucial for organizations that rely on phone calls for daily operations, as it significantly reduces misunderstandings and enhances overall communication effectiveness.

Equipped with advanced technology, the Avaya 585-215-871 supports multiple protocols, including SIP (Session Initiation Protocol), which allows for seamless integration with various communication platforms. This flexibility enables businesses to implement or upgrade their communication systems without requiring overhauls of existing infrastructures. Furthermore, the device is compatible with a wide range of Avaya applications, enhancing its functionality and ensuring that businesses can leverage the latest advancements in communication technology.

In terms of security, the Avaya 585-215-871 is designed with encryption and authentication protocols to protect sensitive communication. This is increasingly important in a world where data breaches and unauthorized access are prevalent concerns for businesses of all sizes. By implementing stringent security measures, organizations can safeguard their communications and maintain the integrity of their data.

User experience is also a focal point in the design of the Avaya 585-215-871. The device offers an intuitive interface, making it easy for users to navigate and utilize its features without extensive training. Coupled with programmable keys, users can customize settings to suit their specific needs, thus enhancing productivity and efficiency.

Additionally, the 585-215-871 supports a range of connectivity options, allowing it to be connected to various networks and devices. This level of adaptability makes it an attractive option for businesses looking to future-proof their communication systems while ensuring that they remain connected across diverse platforms.

Overall, the Avaya 585-215-871 stands out as a comprehensive communication solution. Its combination of high-definition voice quality, robust security features, flexible integration capabilities, and user-centric design makes it a valuable asset for any organization looking to enhance its communication strategies.