Identifying installed PCI cards
Issue 3.3 February 2003 49
Identifying installed PCI cards
If there are problems with the PCI cards, do the following to troubleshoot the proble m. I f al l
PCI cards are operational, you can skip this section.
At the command prompt, enter:
/usr/platform/‘uname -m‘/sbin/prtdiag -v | pg
In the section called IO Cards, there is a listing of the PCI cards. The following are
examples of some of the entries you may see. The display you see depends on your
specific configuration.
In this example:
●Slot 1 is an SAI/P card
●Slot 2 is a SunSwift card
●Slot 3 is an HSI/P card
.
.
========================= IO Cards =========================
Bus# Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- -------------------------------- ----------------------
0 PCI-1 33 1 ebus
0 PCI-1 33 1 network-SUNW,hme
0 PCI-1 33 2 SUNW,m64B ATY,GT-B
0 PCI-1 33 3 ide-pci1095,646
0 PCI-2 33 1 pci114f,1c-pci114f,1c
0 PCI-2 33 2 pci-pci1011,24
0 PCI-2 33 3 pci1214,334-pci1214,334
.
.