DeLonghi EAM4500 manual Cleaning, frothing or steaming, Milk For Cappuccino Program Quantity

Models: EAM4500

1 25
Download 25 pages 61.07 Kb
Page 16
Image 16
CLEANING

CLEANING

After cleaning is complete, remove the milk container and place in the refrigerator. You should not leave the milk outside the refrigerator for more than 15 minutes.

NOTE 4: To change the quantity of coffee or milk delivered automatically into the cup, follow the instructions in section 14.

13 PREPARING STEAMED OR FROTHED MILK (WITHOUT COFFEE)

Remove the lid of the milk container.

Fill the container with the quantity of milk you want to prepare (fig. 19).

Put the lid on the milk container.

Attach the milk container to the appliance (fig. 22)

Place a sufficiently large cup under the milk spout (fig. 23).

If you want to prepare frothed milk using whole milk, put the froth regulator on CAPPUCCINO (fig. 25A) stamped on the milk container lid. If you want to prepare frothed milk using using non-fat- milk, put the froth regulator on CAPPUCCINO NON FAT (fig. 25B).

If, on the other hand, you want to prepare hot milk, put the froth regulator on LATTE (fig. 25C).

Press button frothing or steaming twice (within 2 seconds). The appliance displays:

A

B

C

CAFFELATTE

CAPPUCCINO

CAPPUCCINO

 

 

NON FAT

 

fig. 25

frothing or steaming

and after a few seconds, the milk is delivered from the milk spout into the cup below. (Delivery stops auto- matically).

After delivery is complete, clean the channels inside the milk container lid by pressing button CLEAN as described on the previous paragraph (note 4).

14 CHANGING THE QUANTITY OF COFFEE AND MILK FOR CAPPUCCINOS

The appliance is factory preset to automatically deliver a standard cappuccino. To change these quantities, proceed as follows:

Fill the container with milk up to the maximum level indicated on the container.

Press the MILK FOR CAPPUCCINO PROGRAM QUANTITY button for at least 8 seconds then release the button.

The appliance displays:

MILK FOR CAPPUCCINO PROGRAM QUANTITY

and starts to run off milk.

Once the required quantity of milk has been run off, press the COFFEE FOR CAPPUCCINO PROGRAM QUANTITY button again. Milk delivery stops and the quantity is memorized. You should not run frothed milk for more than 3 minutes at a time.

After a few seconds, the appliance delivers coffee into the cup and displays:

COFFEE FOR CAPPUCCINO PROGRAM QUANTITY

Once the required quantity of coffee has been delivered, press the Manual background button again. Coffee delivery stops and the quantity is memorized.

The appliance is now re-programmed with the new settings and displays: READY.

15

Page 16
Image 16
DeLonghi EAM4500 manual Cleaning, frothing or steaming, Milk For Cappuccino Program Quantity