PROBLEM |
|
|
| CAUSE |
| SOLUTION |
|
|
|
|
|
| |
|
|
|
|
|
|
|
When the | button | • | The appliance is not plugged in. | • | Check that the power cable is plugged into the outlet. | |
is pressed, the appliance |
|
|
|
|
| |
does not turn on. |
|
|
|
|
|
|
|
|
|
|
|
| |
The infuser cannot be | • | The appliance is on. The infuser can | • | Turn the appliance off and remove the infuser (see chapter | ||
| only be removed if the appliance is off. |
| 11.2). IMPORTANT: the infuser can only be removed if | |||
removed for cleaning. |
|
|
|
| the appliance is off. Attempting to remove the infuser | |
|
|
|
|
|
| when the appliance is on may cause serious damage. |
|
|
|
|
| ||
Ground coffee is | being | • Too much ground coffee has been | • | Remove the infuser and thoroughly clean the inside of the | ||
| added. |
|
| appliance, as described in chapter 15.2. Repeat the operation | ||
used (not beans) and the | • | The | button has not been pressed | • | using a maximum of 1 measuring scoop of ground coffee. | |
appliance does not deliv- |
| and the appliance has used both the | Thoroughly clean the inside of the appliance, as described in | |||
| ground coffee added and the coffee |
| chapter 15.2. Repeat the operation, first pressing the | |||
er the coffee. |
|
|
| |||
|
| ground by the mill |
| button as described in chapter 8. | ||
|
| • | Ground coffee has been added when | • | Remove the infuser and thoroughly clean the inside of the | |
|
|
| the appliance is off. |
| appliance, as described in chapter 15.2. Repeat the oper- | |
|
|
|
|
|
| ation, but switch the appliance on first |
|
|
|
| |||
The coffee does not run | • The holes | in the spouts are clogged | • Scrape the holes with a needle (see chapter 15.1, Fig. 27). | |||
out from the spouts, but |
| with dry coffee. |
|
| ||
• | The mobile container inside the service | • | Thoroughly clean the mobile container, particularly near | |||
from around the service |
| door is blocked and cannot swing. |
| the hinges to ensure they are free to swing smoothly. | ||
door. |
|
|
|
|
|
|
|
|
|
|
| ||
The milk does not run out | • | The intake tube is not inserted or is | • | Insert the intake tube in the rubber washer in the milk con- | ||
of the milk spout. |
|
| inserted incorrectly. |
| tainer lid (fig. 20). | |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
| • | The milk container lid is dirty. | • | Clean the milk lid as described in section 15.3. | |
The milk is not well |
|
|
|
|
| |
frothed. |
|
|
|
|
|
|
|
|
|
|
| ||
|
| • | The milk is not cold enough. | • Use milk at refrigerator temperature. If you are still not get- | ||
The milk contains bub- |
|
|
|
| ting the required results, try changing the brand of milk. | |
bles or squirts out of the |
|
|
|
|
| |
milk spout. |
|
|
|
|
|
|
|
|
|
|
|
|
|
23
