Description en
Description of appliance (page 3 - A )
A1. Cup holder/Warming plate
A2. Water spout/milk container coupling
A3. General ON/OFF switch
A4. Power supply cable socket
A5. Boiler outlet/Infusion assembly
A6. Water tank seat
A7. Water tank lid
A8. Water tank with seat for water filter
A9. Water refill indicator
A10. Drip tray
A11. Indicator for drip tray maximum water level
A12. Cup tray
A13. Sliding tray for long coffee/latte macchiato glass
A14. Cup warmer button
Description of control panel (B) (page 3 - B)
B1.
B2.
B3. 1 cup button
B4. 1 cup /“temperature OK” light
B5. 2 cups button
B6. 2 cups/“temperature OK” light
B7. Hot water button
B8. Hot water light
B9. Hot milk/cappuccino button
B10. Hot milk/cappuccino/“temperature OK” light
B11. Hot milk/latte macchiato button
B12. Hot milk/latte macchiato/“temperature OK” light
Milk container description (page 2 - C)
C1. Milk frother lid with froth regulator
C2. CLEAN button
C3. Milk Spout Tube
C4. Milk intake tube
C5. Milk container
Description of accessories (page 2 - D)
D1.
D2. 1 coffee crema filter
D3. 2 coffee crema filter
D4. ESE pod crema filter
D5. Power supply cable (removable)
D6. Tamper/dispenser measure
D7. Removable water/steam spout
D8. Reactive strip to detect water hardness
(Total hardness test)
D9. Descaler
D10. Water softener filter
Instructions for use
Read these instructions carefully before using the appliance. Failure to respect these instructions may result in personal injury or damage to the appliance.
The manufacturer is not liable for damage as a result of failure to comply with these user instructions.
Please note:
Keep these instructions. If the appliance should be transferred to other persons, these instructions must accompany it.
Checking the appliance
After the packaging has been removed, check the integrity of the appliance and the presence of all accessories. Do not use the appliance if it is visibly damaged. Contact the Customer Experience.
Installing the appliance
Attention!
The following safety measures must be complied with when installing the appliance:
•The appliance could be damaged by water infiltration. Do not position the appliance near water faucets or sinks.
•The appliance could be damaged if the water it contains freezes.
Do not install the appliance in a room where the temperature can fall below freezing point.
•Position the power supply cable in a way that it cannot be damaged by sharp edges or by contact with hot surfaces (e.g. electric stoves, cooking surfaces, or gas burners).
Connecting the appliance
Attention!
Make sure that the electric mains voltage corresponds with that indicated on the data plate on the base of the appliance. Insert the power supply cable connector in the socket on the back of the appliance (fig. 1); then insert the plug in the power outlet. Check that the mains power supply voltage corresponds to the value indicated on the rating plate on the bottom of the appliance. If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified professional.
8
