NOTE 2: If it is hard to insert the infuser, before inserting it, squeeze to size by pressing it vigorously from above and below at the same time, as shown in Figure 31.
NOTE 3: If it is still hard to insert the infuser, leave it out of the appliance, close the service door, unplug from the outlet, then plug in again. Wait for all the lights to go off after the
15.3Cleaning the milk container Proceed as follows:
• Remove the milk spouts (fig. 32) and the milk intake tubes.
•Wash the container and lids in a dishwasher or in hot soapy water.
•Make sure there are no milk residues inside the two holes in the lids of the milk container indicated by the arrows in the figure or the milk intake tubes.
• To replace the components of the lid with the wor- ding "STEAMED MILK - LATTE", insert the milk spout and milk intake tube (the softer one) in the hole in the lid as shown in fig. 20.
• To replace the components of the lid with the wor- ding "FROTHED MILK - CAPPUCCINO", insert the milk spout and milk intake tube (the harder one) in the hole in the lid as shown in fig. 20.
Note: To avoid using the wrong intake tube, the “STEAMED MILK
16 CHANGING AND SETTING THE MENU PARAMETERS
After pressing the 
button, when the appliance is ready, you can use the internal menu to modify the fol-
lowing parameters and functions: | • | Coffee temperature | |
• | Clock | • Length of time the appliance remains on | |
• | • | Water hardness | |
• | Descaling process | • | Factory default values |
16.1 Setting the clock
To set the clock, proceed as follows:
•Press the 
button (the light over the button comes on) then press the 
button repeatedly until the appliance displays:
CLOCK 00:00
• Press the | button to set the clock. (If you hold the | button down, the time is changed |
rapidly). |
|
|
•Press the 
button to confirm the value;
•Press the 
button to exit programming mode or 
to change other parameters.
16.2 Setting
This programs the time the appliance will come on automatically and be ready for use.
•Make sure the clock on the appliance is set as described above.
•Press the 
button (the light over the button comes on) then press the 
button repeatedly until the appliance displays:
17
