pac160 GB
S e t t i n g u p
ENGLISH
AIR CONDITIONING WITH
If desired, Pinguino can also be installed on a
12 "
30 cm
12 "
30 cm
7
In this case it will be necessary to:
•Drill a hole in a perimeter wall or in a win- dow pane. Observe the height limits (fig. 9) and the dimensions of the hole given in fig. 8.
•Fit the flange (13) supplied to the hole.
•Fix the hose (14) in the housing at the rear of the appliance (fig 1)
•Fit the end of the hose to the flange (15) as shown in fig. 9.
MAX 45,3"
MAX 115 cm
MIN 19,7"
MIN 50 cm
9
When the hose (14) is not connected, the hole can be closed off with the flange stop- per (13).
N.B.
When operating the appliance with
4.2" / 106 mm
In the window- | In the base |
pane | of the |
| window |
| frame |
8
In the wall: we advise you to insulate the sec- tion of the wall with appropria-
te insulation material.
DEHUMIDIFICATION
Position the appliance in the room without inserting the air exhaust hose (14); this ensures that the dehumidified air will be released directly into the atmosphere.
The air emitted through the front grill will be cold while the air from the rear will be warm (fig. 10) thus ensuring that the room is dehu- midified without variation in temperature.
10
9
