pac160 GB
Troubleshooting
PROBLEM |
| CAUSES |
| REMEDY |
The | • | the power is off |
|
|
does not work | • | the appliance is not plugged in | • | Plug it in |
|
|
|
| |
The | • | The exhaust hose is twisted | • Position exhaust hose correctly | |
works only for a | • | The exhaust hose is blocked | • Check for obstacles blocking | |
short time |
|
|
| the exhaust system |
| • | The exhaust hose is bent | • | Straighten the hose |
The
• a window is open | • | close the window |
• there is a source of heat in the room (lamp, | • eliminate source of heat | |
burner etc.) or there are many people in the |
|
|
room. |
|
|
• the thermostat is set too high | • set the thermostat to a lower | |
|
| temperature |
• air filters are dirty | • | clean the filters |
• the capacity of the |
|
|
adequate for the conditions or the dimen- |
|
|
sions of the room. |
|
|
Strange odour in the | • air filters are dirty | • | clean the filters | |
room |
|
|
|
|
|
|
|
| |
Leaking condensa- | • | appliance incorrectly installed | • see instructions for correct | |
te from the unit |
|
|
| installation of appliance |
| • | condensate collection tank is full | • | Empty the tank |
The unit does not work • The safety mechanism has been activated | • wait for 3 minutes |
for about 3 minutes |
|
after turning on the |
|
appliance. |
|
|
|
See paragraph “Self diagnosis” if the following messages appear on the display: FF, HP, LT, FT, PF.
16