I NSTALLING YOUR PORTABLE
ELECTRICAL CONNECTIONS
Before plugging the appliance into the mains socket, check that:
•The mains power supply corresponds to the value indicated on the rating plate on the back of the appliance;
•The mains socket and electrical circuit are adequate for the appliance;
•The mains socket matches the plug. If this is not the case, have the plug replaced;
•The mains socket is adequately earthed.
Failure to follow these important safety instructions absolves the manufacturer of all liability.
The power cable must be replaced by a qualified professional only.
The instructions below will enable you to prepare your air conditioner for operation as efficiently as possible.
Before use, make sure the air intake and outlet grilles are unobstructed.
AIR-CONDITIONING WITHOUT INSTALLATION
Just a few simple steps and your comfort is ensured with your air conditioner:
• Fit the air exhaust hose 13 in the housing
8at the back of the appliance. Insert it as shown in figure A.
Thanks to the locking pins, it’s possible to use the window bracket also for sliding windows. Position the hole of the bracket so to allow a correct installation of the exhaust hose (see figure C).
A
For optimum results:
• If you have a sash window, place the bracket 17 on the window sill, extend the bracket fully within the window frame, fix the bracket by using the pin then lower the win- dow onto the bracket. Insert the window
outlet 14 of the exhaust hose 13 into the slot, then connect the hose to the air condi- tioner (fig. B ).
B
C
•If you have a double window, use the sucker provided to hold the two parts of the window together (fig. D).
2
1
D
Keep the air hoses as short and free of curves as possible to avoid constrictions
5
