DeLonghi PACA110-A120E Pre p a r i n g fo r u s e, Semi-Permanentinstallation, 134 5,25 in

Pre p a r i n g fo r u s e

SEMI-PERMANENT INSTALLATION

If required, your appliance can also be installed semi-permanently (Fig. E).

•	Fit the wall flange			11	into the hole.
•	Fit the air exhaust hose					13		in the relevant
	hose located on the rear side of the appli-
	ance (fig. A page 5).
	Fit the end of the hose								to the wall
•							13
	flange	11	as shown in fig. G.

11,8 in

30 cm

11,8 in	E
30 cm

MAX 39 in MAX100 cm

G

Proceed as follows:

•Drill a hole ø 5,25 inches (ø 134 mm) in an outside wall or through a window pane. Respect the dimensions and height of the hole given in figure F and G.

134 5,25 in.

in the window	in the wood-	in the wall: it is rec-
		ommended	that
pane	en kickboard
		you insulate a sec-
	of a French
		tion of the	wall
F	window
		using suitable insu-
		lation.

MIN 14 in

MIN 35 cm

When the hose (9) is not fitted, the drilled hole can be closed with the flange cap (11).

NOTE: When installing the air conditioner semi-permanently, you should leave a door slightly open as little as 1/2 “ (1 cm) to guar- antee correct ventilation.

Keep the air hoses as short and free of curves as possible to avoid constrictions.

As special tools are required for installa- tion, we suggest you let install the appliance by specialized personnel.

6