Getting Started

Setting Up the System

You can set up your Delphi Premium Sound System by following these steps:

1.Connect the supplied 18-volt DC power adaptor to the jack on the rear of the Delphi Premium Sound System. Plug the other end into the wall outlet. You may also use 8 “C” batteries (not included).

2.The XM Antenna is located under the top cover of the Delphi Premium Sound System. If needed (i.e. unit is placed away from a south facing window or you live in an area without XM terrestrial repeaters), lift the handle on the top of the unit and remove the cover to access the antenna and wire management area.

Remove the cover by pressing down on the two tabs with your thumbs and sliding the cover away from the front of the Del- phi Premium Sound System. Be sure that the antenna is connected to the antenna jack located inside the antenna compartment on the top of the Delphi Premium Sound System.

You can wind the two cable

 

hooks in the compartment,



leaving just enough cable

Page 9
Image 9
Delphi SKYFI3 manual Setting Up the System