5
2
3
4
5
1
Soap / Lotion Dispenser Installation
Remove the bottle (1). Separate head (2) from body assembly (3). Make sure gasket
(4)is properly seated in the base of the body assembly. Insert body assembly through selected hole in sink. Secure body assembly to sink with nut and gasket (5). From under the sink screw the bottle (1) onto the body assembly shank, then attach head assembly. Note: To fill, lift the head and pump assembly out of the
bottle and pour not more than 8 oz. into bottle. DO NOT remove the bottle each time as this weakens the neck.
Use a funnel to help prevent spills. Pull pump and head assembly out occasion- ally to soak and pump warm water through pump to remove soap
Note: Initially it may take up to 12 pumps to bring soap to the pump tip.
10
