6 | A. | 3 |
|
|
| ||
|
|
| |
|
| 4 |
|
|
| 2 |
|
|
| 1 |
|
|
| 1 |
|
| B. |
|
|
|
| Lock | 1 |
|
| Unlock |
|
Faucet Inspection and Operation
A.Turn on hot and cold water supplies
(1). Pull the hose assembly (2) out of the spout and remove the sprayer (3). Be sure to hold the end of the hose down into the sink and turn faucet handle (4) to the mixed position. Flush water lines for one minute.
IMPORTANT: This flushes away any debris that could cause damage to internal parts. Reinstall the sprayer.
Check all connections at arrows for leaks. Refer back to the appropriate installation instructions and retighten if necessary. If assembled correctly, check for damage to seals and order appropriate replacements.
B.Sprayer will lock into position when brought into proximity of the spout magnet. The sprayer can be removed by either pulling directly out from the spout or by twisting 90° in either direction which will cause the magnets to repel and the head to decouple from the spout (recommended). Check the operation of the sprayer by operating the trigger (1) from aerator to spray.
11