UNPACKING AND CLEANING
Carefully unpack the drill press and all loose items from the shipping container(s). Remove the protective coating from the machined surfaces of the drill press. This coating may be removed with a soft cloth moistened with kerosene. Do not use acetone, gasoline or lacquer thinner for this purpose. Figs. 2 and 3 illustrate the components of the drill press.
WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE TOOL TO THE POWER SOURCE UNTIL
THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE READ AND UNDERSTOOD THE ENTIRE INSTRUCTION MANUAL.
1.Drill Press Head
2.Table Bracket and Column
3.Base
4.Table
5. | Chuck |
6. | Handles (3) |
7. | M8 x 125mm carriage head screws, |
| flat washers, lockwashers, and |
| hex nuts (2 ea.) |
8. | Locking lever for table bracket |
1
2
4
3
Fig. 2
| 7 |
6 | 8 |
|
9. | Table locking lever |
10. | Table Raising and Lowering Handle |
11. | 3mm Hex Wrench |
12. | 5mm Hex Wrench |
13. | |
| Screws (4) |
14. | Chuck Key |
5
14
13
9
10
11
12
Fig. 3
4
